Philips PCA103CD user manual If You Are a Windows 95 User

INSTALLING YOUR DRIVE

Windows 95 directory’s COMMAND sub-directory. You can locate this file by using the File Manager’s Search command in Windows 3.x or the Start menu’s Find command in Windows 95. If the file is missing, contact your DOS or Windows 95 distributor for a copy of it.

3.Insert the Installation diskette into a 3.5” floppy drive.

4.Under DOS, change to the drive where the diskette is inserted and type ￿￿￿￿￿￿￿￿￿￿￿￿￿￿.

Note: You must change to that drive before typing the “INSTALL” command. Simply typing A:\INSTALL or B:\INSTALL will not properly install the driver.

5.Change the destination directory ￿￿￿￿!"￿if necessary and press ￿￿￿￿￿￿￿￿

6.￿￿￿￿￿￿￿￿￿￿Change the name of the directory containing the

file if necessary and press ￿￿￿￿￿.

7.Reboot your computer.

If everything is okay, you can start using your CD- ROM drive right away. Otherwise, make sure that your CD-ROM drive has been correctly set as a master device or a slave device (see Appendix A for instructions). If this still does not solve the problem, contact your Philips distributor or representative.

2.2.2 If You Are a Windows 95 User

Perform the following steps:

1.Install Windows 95, if it is not already installed.

2.Boot your computer. Windows 95 automatically starts.

2 7