213, 10 OS/2 Window | Philips PCA103CD specification

8.Double click the ")*,icon. An OS/2 window appears:

Figure 2-10 “OS/2 Window”

9.At the command prompt, type:

10.At the end of the opened CONFIG.SYS file, add the following line:

11.Close the file after saving it and reboot your PC.

12.Repeat Steps 4 and 5.

This time the CD-ROM icon should appear as an available drive in the &+window.

Why couldn’t I install OS/2 Warp with its CD disc? Is my CD-ROM defective?

No. Your CD-ROM probably had nothing to do with that problem.

Instead, the standard IDE CD-ROM driver contained in Diskette 1 of the OS/2 Warp installation package might not be