Philips PET717/93 quick start Quick Start Guide, Charge the built-in battery, Play discs

Philips Portable DVD Player PET717

Quick Start Guide

1

Charge the built-in battery

Step 1 Switch the POWER ON / OFF/CHR slide selector to the OFF/CHR position.

Step 2 Connect the supplied AC adaptor to the DC IN 12V socket on the DVD Player and to the AC outlet.

The red charge indicator turns on. It takes about 4 hours to fully charge the battery.

When the battery is fully charged, the red charge indicator turns off. Tip

-You can only charge the batter y when the temperature is between 0°C and 35°C.

-When headphones are connected to the DVD Player, the fully charged battery lasts about 2.5 hours.

3Play discs

Step 1 Lift the display panel.

Step 2 Switch the OPEN slide selector to the right to open the disc compartment.

• (For the first time) Remove the protective card.

Step 3 Insert a disc with the printed side facing up.

Step 4 Push the lid down to close the disc compartment.

Disc starts to play automatically. If not, press OK or 2; .

If a menu appears, select an item and then press OK to start play.

4Connect aTV

On the DVD Player,

Step 1 Connect the black end of the supplied AV cable to the AV OUT socket.

On the TV,

Step 1 Connect the white end to the left audio input socket and the red end to the right audio input socket.

Step 2 Connect the yellow end to the video input socket.

2

Install remote control battery

Step 1 Open the battery compartment.

Step 2 Insert 1 CR2025 battery with correct polarity (+/-) as indicated. Step 3 Close the battery compartment.

CR2025CR2025

TV

￿￿￿I￿ I￿

VI￿E￿ I￿

1 2 PET717_93_QSG_V2.0