Connect to the playback device 13
Connecting using Audio/Video (CVBS) Adaptor Cable Use the projector's audio/video adaptor cable (A/V
cable) to connect camcorders, DVD players or digital
cameras. The jacks for these devices are yellow (video),
red (audio right) and white (audio left).
1Connect the supplied A/V cable to the projector's
mini-HDMI socket.
2Connect the video device's audio/video jacks to the
A/V cable using a conventional composite video
(RCA) cable.
3Select Menu > Source and switch to AV.
Connecting to mobile multimedia devices
Some video devices (e.g.: pocket multimedia players, ...)
require specific connection cables. There are either
supplied with the device or acquired from the manufac-
turer of the multimedia device. Please note that only the
original cables from the device manufacturer may func-
tion.
Connecting using Component-Video (YPbPr/YUV) CablePlease use this type of connection to obtain the highest
possible image quality. This cable is available as an acces-
sory. The device jacks have the colours green (Y), blue
(U/Pb), red (V/Pr) for the video signal and red (audio
right) and white (audio left) for the audio signal.
1Connect the video component cable (accessory) to
the projector's mini-HDMI socket.
2Connect the video device's appropriate colored
sockets to the component video cable of the projec-
tor using a conventional component video (RCA)
cable.
3Select Menu > Source and switch to Component.
Note
Switching to the multimedia device sig-
nal output
See the multimedia device instruction manual
to find out how to switch the signal output to
this jack.
Note
YCbCr
Note that the YPbPr outlets are labelled
YCbCr on some devices.
Note
Two red phono (RCA) connectors
When connecting, note that there are two
red phono (RCA) connectors on the cable.
One is for the right audio signal and the
other for the V/Pr element of the compo-
nent video signal. If these two connectors
are inserted incorrectly, the projected
image appears green and the audio signal
for the right speaker will not work.