1 General Safety Information

Do not make any changes or settings that are not described in this user manual. Physical injury or damage to the device or loss of data can result from improper handling. Take note of all warning and safety notes indi- cated.

Under the following conditions, a layer of moisture can appear inside the device which can lead to malfunctions:

·if the device is moved from a cold to a warm area;

·after a cold room is heated;

·when this device is placed in a damp room.

Proceed as follows to avoid any moisture build-up:

Setting Up the Device

The device is exclusively for indoor use. The device should be placed securely on a stable, flat surface. Posi- tion all cables in such a way that no one will stumble on them, thus avoiding possible injuries to persons or dam- age to the device itself.

Do not plug in the device in moist rooms. Never touch the mains cable or the mains connection with wet hands.

The device must have sufficient ventilation and may not be covered. Do not put your device in closed cabinets or boxes.

Do not place the machine on soft surfaces such as table- cloths or carpets and do not cover the ventilation slits. Otherwise the device could overheat or catch fire.

Protect the device against direct sunlight, heat, large temperature fluctuations and moisture. Do not place the device in the vicinity of heaters or air conditioners. Observe the information on temperature and humidity in the technical data.

When the device is running for a long period of time, the surface becomes hot and a warning symbol appears on the projection. The device switches automatically to stand-by mode when it gets too hot. After the device has cooled down, you can continue playback by pressing any key.

Do not allow liquids to enter into the device. Switch off the device and disconnect it from the mains supply if liq- uids or foreign substances end up inside the device. Have the unit inspected by a technical service depart- ment.

Always handle the unit with care. Avoid touching the lens. Never place heavy or sharp objects on the projec- tor or the power cable.

If the projector gets too hot or emits smoke, shut it down immediately and unplug the power cable. Have your device examined by trained professionals at a tech- nical service location. To prevent the spread of fire, open flames should be kept away from the device.

1Seal this device in a plastic bag before moving it to another room, in order for it to adapt to room con- ditions.

2Wait one to two hours before you take the device out of the plastic bag.

The device should not be used in a very dusty environ- ment. Dust particles and other foreign objects may damage the unit.

Do not expose the device to extreme vibrations. It may damage the internal components.

Do not allow children to handle the device without supervision. The packing materials should be kept out of the hands of children.

Repairs

Do not make any repairs to the device yourself. Improper maintenance can result in injuries or damage to the device. Only have your device repaired by an authorised service centre.

Do not remove the type label from your device; this would void the warranty.

Power Supply

Use only the enclosed power adapter (see chapter Appen- dix / Technical Data). Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This equipment complies with the volt- age type specified on the unit.

The capacity of the battery diminishes with time. If the device functions only with the power supply, the battery is defective. Contact an authorised service centre to replace the battery.

Do not try to replace the battery yourself. Incorrect handling of the battery or using the wrong type of bat- tery can cause damage to the device or cause injury.

4

Philips · PPX2450 · 2480

Page 3 Page 5
Page 4
Image 4
Philips PPX2450 user manual General Safety Information, Setting Up the Device, Repairs, Power Supply
Page 3 Page 5

PPX2450 specifications

The Philips PPX2450 is a compact and portable pico projector that has garnered attention for its impressive performance and versatility. Designed for users who require a mobile projection solution, it packs a wealth of features into a small, lightweight package, making it ideal for both personal and professional use.

One of the standout features of the PPX2450 is its impressive brightness. With a projection light output of up to 300 lumens, it ensures that presentations and videos remain clear and vivid, even in less-than-ideal lighting conditions. This makes it suitable for a variety of environments, from dimly lit conference rooms to cozy home settings.

The projector boasts a native resolution of 720p (1280 x 720 pixels), which provides sharp and detailed images. As a DLP (Digital Light Processing) projector, it employs advanced technology that delivers high-quality visuals with excellent color depth. This is crucial for users who want to maintain the integrity of their content, whether it be business presentations, educational materials, or movies.

Connectivity is another area where the PPX2450 excels. It is equipped with multiple input options, including HDMI, USB-C, and a built-in media player, allowing users to easily connect their laptops, smartphones, tablets, or USB drives. Wireless connectivity is also supported, enabling seamless streaming from compatible devices without the need for cumbersome cables.

In terms of usability, the Philips PPX2450 features an intuitive interface and a user-friendly remote control. This ensures that navigating through menus and selecting content is straightforward, making it accessible even for those who may not be tech-savvy. The projector also supports screen mirroring, allowing users to project their mobile device displays directly onto larger screens effortlessly.

Another significant feature of the PPX2450 is its built-in battery, which provides up to 3 hours of playback time on a single charge. This makes it perfect for situations where power outlets are scarce, such as outdoor movie nights or presentations on the go.

Overall, the Philips PPX2450 represents a perfect blend of portability, performance, and technological advancement. Whether for business or entertainment, it offers a powerful projection solution that is both practical and easy to use, appealing to users seeking flexibility in their visual presentations.
Top Page Image Contents