Philips RQ1062, RQ1052 manual Travel lock, Activating the travel lock, Deactivating the travel lock

12English

-- To remind you to replace the shaving unit, the

shaving unit symbol flashes (all types) and you

hear a beep when you switch off the shaver (RQ1090 only).This happens at the end of 7 successive shaves to remind you to replace the shaving unit.

Note:The displays of types RQ1062, RQ1060, RQ1052 and RQ1050 look different but show the same indication.

Travel lock

You can lock the shaver when you are going to travel.The travel lock prevents the shaver from being switched on by accident.

Activating the travel lock

1 Press the on/off button for 3 seconds to enter the travel lock mode.

,, The lock symbol appears on the display (all types) and you hear a beep (RQ1090 only) to indicate that the travel lock has been activated.

Note:The displays of types RQ1062, RQ1060, RQ1052 and RQ1050 look different but show the same indication.

Deactivating the travel lock

1Press the on/off button for 3 seconds.

,, The motor starts running to indicate that the travel lock has been deactivated.

The shaver is now ready for use again.

Note:When you place the shaver in the plugged-in Power Pod or charger, the travel lock is automatically deactivated.