English 13
Blocked shaving heads
-If the shaving heads are blocked, the shaving unit symbol and the tap symbol with exclamation mark flash. In this case, the motor cannot run because the shaving heads are soiled or damaged.
Note:The displays of types RQ1062, RQ1060, RQ1052, and RQ1050 look different but show the same indication.
-When this happens, you have to clean the shaving unit or replace it.
-The shaving unit symbol and the tap symbol
with exclamation mark continue to flash until you unblock the shaving heads.
Charging
Charging takes approx. 1 hour.
A fully charged shaver has a shaving time of up to
65 minutes, which is enough for approx. 21 shaves. The actual shaving time is calculated by the shaver. If you have a heavy beard, the shaving time may be less than 65 minutes.The shaving time may also vary over time, depending on your shaving behaviour and beard type.
Quick charge
After the shaver has charged for 5 minutes, it contains enough energy for one shave.
1Put the small plug in the Power Pod.
2Put the adapter in the wall socket.
