INTRODUCTION
Congratulations on your purchase of this Philips Universal remote control. This
remote control is designed for easy operation of most equipment in the home. It
can replace up to 4 remote controls of almost any brand, for televisions (TV), video
recorders (VCR), satellite receivers (SAT) and DVD equipment, even if the original
remote control is lost or broken.
The Philips Universal Remote Controls are ready for use with Philips TV, VCR, SAT
and DVD equipment. To operate equipment from other brands, you have to set up
the Universal Remote Control by following 3 easy steps.
If the brand of your equipment is known, follow the procedure described in
chapter: SETTING UP BY CODE ENTRY
If the brand of your equipment is unknown or not in the code list, you can have the
Universal Remote Control do an automatic code search for your equipment.
See chapter SETTING UP BY AUTOSEARCH.
FUNCTIONS OVERVIEW (see diagram)
AIndicator LED
BTV/VCR/SAT/DVD Device buttons
CyPower
DMenu To operate menu control
EP+, P- Next / previous programme
TV volume Controls
FaTV Volume louder / softer
GcMute
Even if you're operating the VCR/DVD, you can directly access the volume of the
TV
with these buttons
HDigits 0..9
I-1/2 digits, 10, 1-
JAV External / source select
KaTeletext on
LITeletext off
MShift Shift button
NOK To confirm your selection
OFastText keys / VCR/DVD
red 5rewind
green 9stop
blue 6wind
2play
yellow ;pause
0record
Depending on your equipment, some buttons may work differently.
Check the manual of your equipment to know which functions it will operate.
NORMAL OPERATION
1. Press a device button to select the device you want to operate
2. Press any of the function buttons to operate that function.
Instructions for use English
4
English
XP SBC RU 254.1 booklet 31-01-2003 11:55 Pagina 4