Connect RAGA to a computer
1 Connect the USB plug of the supplied USB cable to a spare USB port on your computer.
2 Connect the small USB plug of the USB cable to the small USB jack on RAGA.
3 Turn on your computer. »» RAGA charges.
Install Philips Songbird for the first time
When you connect RAGA to the PC for the first time, a
1
2
Note
•• The installation requires you to agree to the license terms.
If the
1
2
3
4
Note
•• The installation requires you to agree to the license terms.
Battery level indication
The display indicates the approximate levels of the battery status as follows:
100% 75% 50% 25% 0%
»» A flashing battery screen indicates that the battery is low.The player saves
all settings and switches off within 60 seconds.
Note
•• Rechargeable batteries have a limited number
of charge cycles. Battery life and number of charge cycles vary by use and settings.
•• The charging animation stops and the 
icon is displayed when the charging process is completed.
Tip
•• You can conserve battery power and increase the play time of RAGA if you go to 
> [Display Settings] > [Screen off timer] and ensure that the shortest timer setting is selected.
Software loaded on the
RAGA
RAGA comes with the following software:
•Philips Songbird (helps you update the firmware of RAGA and transfer your media files).
Files loaded on the RAGA
The following files are loaded on RAGA:
•User Manual
•Frequently Asked Questions
•Safety and warranty information
•Worldwide warranty information
8EN
