Philips SA2RGA04, SA2RGA08, SA2RGA02 user manual Technical data, System requirements

11 Technical data

Power

Power supply: 220 mAh Li-ion polymer internal rechargeable battery

Play time¹ (music): 22 hours

Software

Philips Songbird: to update firmware and transfer music

Connectivity

Headphone 3.5 mm

USB 2.0 High speed

Sound

Channel separation: 45 dB

Frequency Response: 20 - 18,000 Hz

Output power: 2 x 2.4 mW

Signal to noise ratio: > 84 dB Audio playback Supported formats:

MP3:

MP3 bit rates: 8 - 320 kps and VBR

MP3 sample rates: 8, 11.025, 16, 22.050, 32, 44.1, 48 kHz

WMA:

WMA bit rates: 10 - 320 kbps CBR, 32 - 192 kbps VBR

WMA sample rates: 8, 11.025, 16, 22.050, 32, 44.1, 48 kHz

FLAC:

FLAC sample rates: 1 - 1,048 kHz APE:

APE sample rates: 8 - 48 kHz

WAV

Storage media

Built-in memory capacity²: SA2RGA02 2GB NAND Flash SA2RGA04 4GB NAND Flash SA2RGA08 8GB NAND Flash Music transfer³

Songbird (sync)

Windows Explorer (drag and drop)

Display

Color LCD 128 x 64 pixels

Note

••

•• ¹ Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.

•• ² 1GB = 1 billion bytes; available storage capacity is less. Full memory capacity may not be available as some memory is reserved for the player. Storage capacity is based on 4 minutes per song and 128 kbps MP3 encoding.

•• ³ Transfer speed depends on operating system and software configuration.

System requirements

•Windows® XP (SP2 or above) / Vista / 7

•Pentium III 800 MHz processor or higher

•520 MB RAM

•500 MB hard disk space

•Internet connection

•Windows® Internet Explorer 6.0 or later

•USB port

22EN