JVC GD-17L1G, GD-19L1G manual Power Connection, Power cord, Fuse

Models: GD-19L1G GD-17L1G

1 24
Download 24 pages 53.55 Kb
Page 4
Image 4
POWER CONNECTION

in places subject to direct sunlight,

in badly ventilated places,

in automobiles with doors closed.

Do not cover the ventilation slots while in operation as this could obstruct the required ventilation flow.

When dust accumulates on the screen surface, clean it with a soft cloth.

Unplug this unit from the AC outlet and refer servicing to qualified service personnel under the following conditions:

when the power cord is frayed or the plug is damaged,

if liquid has been spilled into the unit,

if the unit has been dropped or the cabinet has been damaged,

when the unit exhibits a distinct change in performance.

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Always refer servicing to qualified service personnel.

When replacement parts are required, have the service personnel verify in writing that the replacement parts he/she uses have the same safety characteristics as the original parts. Use of manufacture’s specified replacement parts can prevent fire, shock, or other hazards.

Upon completion of any servicing or repair work to this unit, please ask the service personnel to perform the safety check described in the manufacturer’s service literature.

POWER CONNECTION

The power supply voltage rating of this product is AC 120 V and AC 220~240 V, the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries.

Power cord

Power supply voltage :

AC 120 V

AC 220~240 V

AC 220~240 V

Countries :

U.S.A. and Canada

European and Asian countries

United Kingdom

Warning:

Do not use the same Power Cord for AC 120 V as for AC 220~240 V. Doing so may cause malfunction, electric shock or fire.

Note for the United Kingdom power cord only

The plug on the United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a correctly rated approved type, re-fit the fuse cover. (Consult your dealer or qualified service personnel.)

How to replace the fuse

Open the fuse compartment with the blade screw driver,

And replace the fuse.

(* An example is shown in the illustration.)

Fuse

4

Page 4
Image 4
JVC GD-17L1G, GD-19L1G manual Power Connection, Power cord, Fuse