Philips SB170 user manual Get started, Connect power, Turn on, Select a source, Set the clock

3 Get started

Always follow the instructions in this chapter in sequence.

Connect power

Caution

•• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of this product.

•• Risk of electric shock! When you unplug the AC power

adaptor, always pull the plug from the socket. Never pull the cord.

Connect the AC power adaptor between

•the DC IN socket at the back of this product, and

•the power supply.

DC IN

Turn on

Press POWER.

»»The product switches to the last selected source.

Switch to standby mode

Press POWER again to switch the product to standby mode.

»»The clock (if set) is displayed.

Select a source

Press SOURCE/SET to select a source.

•Bluetooth mode: Bluetooth indicator lights up.

•FM preset mode: PXX is displayed with XX blinking (XX indicates the preset number of the current station), and then the current station is broadcast with its frequency displayed.

•FM mode:The frequency of current station is displayed.

•AUDIO IN mode: AUX is displayed.

Set the clock

1 In standby mode, press and hold SOURCE/SET for two seconds. »»Hour digits begin to blink.

2 Press - TUNE/TIME or TUNE/TIME+ repeatedly to set the hour.

3 Press SOURCE/SET to confirm. »»Minute digits begin to blink.

4 Press - TUNE/TIME or TUNE/TIME+ repeatedly to set the minute.

5 Press SOURCE/SET to confirm. »»[12H] or [24H] begins to blink.

6 Press - TUNE/TIME or TUNE/TIME+ to select a time format.

• [12H]: 12-hour time format

• [24H]: 24-hour time format

7 Press SOURCE/SET to confirm.

»»The set time is displayed.

4EN