RU252.qxd
English
Instructions for use
Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Keys and functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Code list of all brands / equipment . . . . . . . . . . . . . . . . . . .
1. Introduction
Congratulations on your purchase of the Philips SBC R252 universal remote control. After installing the remote control you can operate a maximum of 2 different appliances with it:TV and VCR/DVD players/recorders.
You can find information about how to prepare this remote control for use in the chapter ‘Installing the remote control’.
2. Installing the remote control
Inserting the batteries
1Press the cover inwards and slide it in the
direction of the arrow.
2 Place two R03, UM4 or AAA type batteries into the battery compartment, as shown.
3Slide the cover back and click it firmly into place.
Testing the remote control
The remote control has been programmed to operate most Philips appliances. Because the RU252 may use different signals for each make and even for different models of the same make, it is advisable to test whether your appliance responds to the RU252.
The example below (TV) instructs you how to do this.You can repeat the same steps for other appliances (VCR/DVD players/recorders) which you want to operate using the RU252.
Example of TV:
1Turn your TV on manually or use the original remote control. Tune to channel 1.
2Press the RU252’s TV key to select TV.
3Check whether all the keys are working. For an overview of the keys and their functions see ‘3. Keys and functions’.
–If the TV responds as it should to all of the key commands the RU252 is ready for use.
•If the device does not respond at all or not to all of the key commands, follow the instructions under ‘Setting the remote control’.
4