RU252.qxd
English
Instructions for use
Automatically setting the remote control
If you cannot find the right code for your brand device, the remote control can automatically search for the right code.
Example of TV:
1Make sure the TV is switched on and select a channel using the original remote control or the keys on the TV (for example channel 1).
The RU252 emits the ‘switch off TV’ signal for all models of TV that are
stored in the memory.
•If the device is a
2Then keep keys 1 and 3 on the RU252
pressed simultaneously for three seconds, until the green indicator light remains lit.
3Press the Standby key of the RU252 briefly.
–The RU252 now starts emitting all known ‘TV off ’ signals, one by one. Each time a code is sent, the green indicator
light flashes.
4When your TV switches off
you press the Standby key of the RU252 twice within 1 second, to confirm.
– The RU252 has now found a code that works on your TV.
5 Check if you can operate all functions on your TV with the RU252.
•If this is not the case, you can redo the automatic setting.The RU252 will then search for a code that perhaps works better.
–After the RU252 has run through all the known codes, the search will stop automatically and the green light will stop flashing.
–Automatic programming of a TV takes a maximum of 8 minutes. For VCR/DVD this time is 4 minutes.
6
