Philips SBC RU 510 manual Reset your remote control to its original presets

Instructions for use

1

2

3

4

1		6
9	9	4
0	-	9

SHIF T

3 Press key 1 and count the number of times the green LED flashes. This is the first digit of the 4-digit code. (No flashes means the digit is zero.)

4 Press key 2 and count the number of flashes for the second digit.

5 Press key 3 and count the number of flashes for the third digit.

6 Press key 4 and count the number of flashes for the forth digit.

7 Note the code.

Add a specific function to your remote control

In case you do not find the function you want to use (e.g. a specific teletext function), it can easily be added to your remote control’s functionality. All you have to do is contact the Philips Universal Remote Control helpline to obtain the 3-digit code for the missing function. The rest of the procedure is quite simple:

1 Press and hold keys 1 and 6 simultaneously - for about three seconds - until the green LED lights up.

2 Enter 9, 9 and 4, using the number keys.

3 Enter the 3-digit code you received from the helpline using the number keys, within 30 seconds.

4 Press the key under which you want to store the new function. The LED flashes twice to indicate a succesfull installation.

If you want to store the function under a Shift/Key combination; first press Shift, then press the required function key.

N O T E

-The original function of the key will be overwritten. If you want to return to its original function see the following section about resetting.

-Remember: no functions can be performed by this remote control that are not present on the equipment you are operating!

English

16

9 8 1

Reset your remote control to its original presets:

If you want to return to the original functions of all keys and delete all added functions under programmed keys a simple reset procedure is sufficient:

1 Press and hold keys 1 and 6 simultaneously - for about three seconds - until the green LED lights up.

2 Enter 9, 8 and 1, using the number keys.

-The LED flashes twice to indicate a succesfull reset. The keys on your remote control will now perform their default functions.

5