TALK-BACK POSSIBILITY
The receiver also has a
•Switch the transmitter to STANDBY using the MODE switch (fig. 1.6).
•Switch the receiver on the transmitter on to an acceptable sound level using the VOLUME control (fig. 1.9).
•Keep the TALK button (fig. 1.3) pressed on the receiver and talk clearly into the microphone (fig. 1.1).
–The signal is transmitted by the receiver and the received signal is heard on the transmitter speaker.
–Adjust the sound level as required.
Notes:
–Talking back via the receiver is only possible if the receiver is not receiving a signal!
–The transmitter only receives a signal if it is not already transmitting sounds.
–Switch the receiver on the transmitter off using the VOLUME control (fig. 1.9) again after using
SBC367page 7
4. OPERATION
English
7