Philips SC2003 Cleaning and maintenance, Reddish filter glass inside the precision attachment

22ENGLISH

Cleaning and maintenance

To ensure optimal results and a long life for the appliance, clean the appliance before and after each use and, if necessary, also during the treatment.The appliance loses its effectiveness if you do not clean it properly.

Never clean the appliance or any of its parts under the tap or in the dishwasher.

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance.

Never scratch the light exit window or the metallic frame inside the attachments.

Note: Make sure that the contact switches of the safety ring do not get congested with dirt.

Note: Stop using the appliance when it is no longer possible to clean the light exit window or the attachments.

1Switch off the appliance, unplug it and let it cool down.

Note:The light exit window becomes hot during use. Make sure it has cooled down before you clean it.

2To remove the attachment, put your fingers in the recesses at the top and bottom and pull gently.The attachment should come off easily.

3Moisten the soft cloth supplied with the appliance with a few drops of water and use it to clean the following parts:

-- the light exit window

-- the outside surface of the attachments -- the metallic frame inside the attachments

-- the reddish filter glass inside the precision attachment

Note: If water does not clean effectively, use a few drops of high-percentage alcohol to clean the parts mentioned above.

Note: A contaminated light exit window and/or attachment can look like this picture. Make sure you clean the appliance before and after each use and, if necessary, also during the treatment according to the instructions in this section.

Tip: If it is no longer possible to clean the edges of the attachments with the enclosed cleaning cloth, use a cotton bud instead. Make sure that no fluff or fibres stay behind on the attachments or on the light exit window.

4If necessary, clean the outside of the appliance with the dry soft cleaning cloth supplied with the appliance.

Storage

1Switch off the appliance, unplug it and let it cool down.

2Clean the appliance before you store it.

3Put the appliance in the case supplied.

4Store the appliance in a dry place at a temperature between 0°C and 60°C.