ENGLISH 9

Problem solving

 

Problem

Solution

Temperature too low.

• Turn the click-step control knob

 

4 to the right until the indicator

 

lamp lights up red to start the

 

heating up again.

 

• Check ring filling and start

 

temperature.

 

 

Temperature too high.

• Lower the adjustment setting.

 

• Check ring filling and start

 

temperature.

The jar has not been heated correctly.

Stir the contents from time to time while heating. Check that the click-step control knob is in the

position.

Unit does not warm up.

Wait 15 minutes between

 

consecutive uses to allow the safety

 

cut-out to reset.

 

 

The indicator light

This is normal; it may turn on or off

switches on and off

while heating.

while keeping warm.

 

 

 

Indicator light does not

Shield indicator from ambient light

seem to light.

to improve visibility.

 

 

The bottom of the tank

Hard water deposits are normal

is spotted.

and may increase if your water is

 

very hard; remove the deposits

 

periodically with white vinegar

 

(see maintenance).

Page 9
Image 9
Philips SC250SBC manual Problem solving, Problem Solution