• Allow adequate ventilation of the unit when mounted on the
wall.Do not mount it directly above heating vents, other
heat-generating sources or in direct sunlight.
Mounting the camera unit
Before mounting,first select the best possible location for the
unit.See ‘Tips for positioning the camera unit’.
If you wish to operate the unit on battery power,first insert the
batteries into the unit.See ‘Setting up for battery-operated use’.
Mounting to a wall
•Attach the unit wall mount recess (A-6) to a screw or hook.
Using the mounting clip
•Insert the mounting clip feet into the recess at the bottom of
the unit.
Gently push the two front feet forward until they click into
position.Then gently push down the rear foot until it clicks
into position.
•Clip the mounting clip (A-13) to the edge of a table or
cupboard.
Setting up for mains-operated use
1Connect the power adapter cord to the unit power supply
jack (DC 7.5V --<<++- A-11).
2Connect the AC power adapter (A-12) to a wall outlet.
Unwrap and fully extend the AC adapter cord.
‹ The camera unit is now ready for mains-operated
use.
EN Getting your baby cam ready
8