Philips SCD491 Monitor unit (parent unit)

EN
9
Setting up for battery-operated use
When batteries are installed,you have an automatic back-up in
case of mains failure.
1Remove the battery compartment cover (A-5).
2Insert four 1.5V AA batteries,noting the + and –
configuration inside the battery compartment.Batteries are
not supplied,we recommend Philips alkaline batteries.
3Close the battery compartment cover (A-5).
‹ The camera unit is now ready for battery-operated
use.
Monitor unit (parent unit)
The monitor unit can be mains- or battery-operated.When
batteries are installed,you have an automatic back-up in case of
mains failure.
Setting up for mains-operated use
1Connect the power adapter cord to the unit power supply
jack (DC 8.0V --<<++ - B-12).
2Connect the AC power adapter (B-10) to a wall outlet.
Unwrap and fully extend the AC adapter cord.
‹ The camera unit is now ready for mains-operated
use.
Setting up for battery-operated use
1Slide down the belt clip/support (B-15) and lift it up.
2Remove the battery compartment cover (B-7) by sliding it
downwards.
3Insert the five 1.2V AA rechargeable batteries supplied,noting
the + and – configuration inside the battery compartment.
Getting your baby cam ready