Philips SCD588/54 Connecting / disconnecting belt clip and neck strap, Paging parent unit

Other features

EN

Connecting / disconnecting belt clip and neck strap

If the parent unit is operated using batteries, you can carry it in and around your house, allowing you freedom of movement while still monitoring your baby.

Connect

•Insert the little spindle on the rear of the belt clip into the recess (B-10) on the rear of the parent unit.Twist the belt clip to the left until it clicks in position.

Disconnect

•Twist the belt clip to the right (TURN B) and take it off.

Connecting the neck strap

•Insert the little spindle at the end of the neck strap into the recess (B-10) on the rear of the parent unit.

Twist the spindle to the left until it clicks in position.

Disconnecting the neck strap

•Twist the spindle to the right (TURN B) and remove it.

Paging parent unit

When the parent unit is misplaced and the volume is switched off, you can use the PAGE button (A-6) on the baby unit to locate the parent unit.

1Briefly press the PAGE button (A-6) on the baby unit. > A paging alert will sound on the parent unit.

2To stop the paging alert, briefly press the page button (A-6) again or any button on the parent unit.

Note: If you press the PAGE button (A-6) too long, the paging alert will not sound.

15