16 English
Question | Answer |
Why does the parent unit | The microphone sensitivity level of the baby unit may be set too low. |
react slowly to the baby’s | Increase the microphone sensitivity level with the SENSITIVITY |
crying? | button on the parent unit. |
Why do the batteries of | The microphone sensitivity level of the baby unit may be set too |
the baby unit run low | high, which causes the baby unit to transmit more often. Decrease |
quickly? | the microphone sensitivity level with the SENSITIVITY button on the |
| parent unit. |
| The volume on the baby unit may be set too high, which causes the |
| baby unit to consume a lot of energy. Decrease the volume of the |
| baby unit. |
| Perhaps you have turned on the nightlight. If you want to use the |
| nightlight, we advise you to run the baby unit from the power supply. |
Why does the charging | The parent unit may be turned on during charging.Turn off the |
time of the parent unit | parent unit during charging. |
exceed 8 hours? |
|
The specified operating range of the baby monitor is 300 meters/900 feet. Why does my baby monitor manage a much smaller distance than that?
Why is the connection lost every now and then? Why are there sound interruptions?
What happens during a power failure?
The specified range is only valid outdoors in open air. Inside your house, the operating range is limited by the number and type of walls and/or ceilings in between. Inside the house, the operating range is up to 50 meters/150 feet.
The baby unit and the parent unit are probably close to the outer limits of the operating range.Try a different location or decrease the distance between the units. Please note that it takes about 30 seconds each time before a connection between the units is established.
If the parent unit is sufficiently charged, it continues to operate during a power failure, both inside and outside the charger. If there are batteries in the baby unit, it automatically switches to battery operation in case of power failure.
Is my baby monitor secure from eavesdropping and interference?
Some buttons do not seem to work when I press them. What do I do wrong?
The operating time of the parent unit is supposed to be at least 24 hours. Why is the operating time of my parent unit shorter?
The DECT technology of this baby monitor guarantees no interference from other equipment and no eavesdropping.
You have to press all buttons (except the on/off buttons and the TALK button) briefly. If you press them too long, they do not work.
When the parent unit batteries have been charged for the first time, the operating time is less than 24 hours.The batteries only
reach their full capacity after you have charged and discharged them at least four times.
The volume of the parent unit may be set too high, which causes the parent unit to consume a lot of energy. Decrease the volume of the parent unit
