ENInstall

Set date and time

1.Press mMENU.

2.Scroll :to Clock & Alarm and press mSELECT.

3.Press mSELECT to enter Set Date/Time.

4.Enter current time (HH:MM) and current date (DD/MM/YY) and press mSELECT.

WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider. Please check the date & time settings in your ISDN system or contact your network provider.

Now, you are ready to use your phone.

Basic operations of your SE630

Make a call

Enter the phone number (maximum 24 digits) and press rto dial the number.

For details, please refer to "Make a call" on page 17.

Answer or end a call

Press rkey to answer a call.

Pressekey to end a call.

For details, please refer to "Answer a call" and "End a call" on page 18.

Switch the handset on/off

Press and hold ekey for 5 seconds to switch off the handset in stand-by mode.

Short press ekey to switch on the handset again.j

Keypad lock/unlock

Press and hold *key for 2 seconds to lock and unlock the keypad in stand-by mode.

Paging

The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries.

Press c key on the base until the handset starts to ring. Once retrieved, press eto end the paging.

14

Page 14
Image 14
Philips manual Set date and time, Basic operations of your SE630