Philips SE765 user manual Register the handsets, Unregister the handsets, Auto registration

Press MENU on the handset.

Select [ADVANC. SETTINGS] > [REGISTER], then press [SELECT] to confirm.

Press and hold on the base station for 5 seconds until you hear a confirmation beep.

Enter the system PIN. Press [CLEAR] to make corrections.

Press [OK] to confirm the PIN.

»» Registration is completed in less than 2 minutes.The base automatically assigns a handset number to the handset.

15Advanced settings

Register the handsets

You can register additional handsets to the base station.The base station can register up to 5 handsets.

Auto registration

1 Place the unregistered handset on the base station.

»» The handset detects the base station and start to register automatically.

»» Registration is completed in less than 2 minutes.The base station automatically assigns a handset number to the handset.

Manual registration

If auto registration fails, register your handset manually to the base station.

1

2

3

4

5

Note

•• If the PIN is incorrect or no base is found		ish
		n gl
within a certain period, your handset displays
a notification message. Repeat the above		E
procedure if registration fails.
	Note
•• The preset PIN is 0000. No change can be
made on it.

Unregister the handsets

1 If two handsets share the same base station, you can unregister a handset with another handset.

2 Press MENU.

3 Select [ADVANC. SETTINGS] > [UNREGISTER], then press [SELECT] to confirm.

4 Enter the system PIN. (The preset PIN is 0000). Press [CLEAR] to remove the number.

5 Select the handset number to be unregistered.

6 Press [SELECT] to confirm. »» The handset is unregistered.

Tip

•• The handset number displays beside the handset name in standby mode.

EN 39