Call screening
You can hear the caller while he is leaving a message.Then you can decide whether or not to talk to the caller directly.
From the base
Press 
/ 
to adjust the speaker volume during call screening. The lowest volume level turns off the call screening.
Set the ring delay
You can set the number of times the phone rings before the answering machine picks up the call.
1
2
3
Note
•• Ensure that the answering machine is switched on before this feature can be applied.
Tip
•• When you access the answering machine remotely, you are recommended to set the ring delay to [ECONOMY] mode. This is a cost effective way to manage your messages. When there are new messages, the answering machine picks up the call after 3 rings; When there is no messages, it picks up the call after 5 rings.
Remote access
You can operate your answering machine when you are away from home. Simply make a call to your phone with a touch tone phone and enter your
Note
•• The remote access PIN code is the same as your system PIN. The preset PIN is 0000.
Activate/deactivate the remote access
You can allow or block remote access to the answering machine.
1
2
3
Access the answering machine remotely
1 Make a call to your home number with a touch tone phone.
2 Enter # when you hear the outgoing message.
3 Enter your PIN code.
»» You now have access to your answering machine, and you can now listen to the new messages.
Note
•• You have 2 chances to enter the correct PIN code before your phone hangs up.
4 Press a key to carry out a function. See the Remote access commands table below for a list of available functions.
44EN
