Philips SNU6500 manual Network Connection Problems

EN

ProblemPossible cause Solution

NETWORK CONNECTION PROBLEMS

If the Link LED on	PC or other network	Make sure the computer and other
the Wireless USB	devices switched off.	network devices are receiving power.
Adapter 11g True
Turbo 108 Mbps does
not light, or if you
cannot access any
network resources
from the computer.
No access to a	Service unavailable.	Check that you have enabled and
Windows or Net-		configured the service correctly.
Ware service on the		If you cannot connect to a particular
network.		server, be sure that you have access
		rights and a valid ID and password.
		If you cannot access the Internet, be
		sure you have configured your system
		for TCP/IP.
If your wireless	Base Station / Access	Make sure the access point that the
adapter cannot	Point is switched off.	station is associated with is powered
communicate with a		on.
computer in the
network when	Range too long	Reposition your Wireless Adapter.
configured for	(weak radio signal).
Infrastructure mode.	Wrong settings.	Make sure the SSID and the network
		encryption key are the same as those
		used by the wireless access point.
Network speed	USB 1.1 port used	Connect the wireless adapter to a
does not	in stead of USB 2.0.	hi-speed USB 2.0 port for maximum
exceed 11 Mbps.		speed.
	Other network	Make sure all network components
	components are	are suitable for high network speeds.
	unsuitable for higher
	network speeds.

20