EN
Operating the WebCam Chapter
Motion detection
In the ‘Monitor’ menu you can set up the WebCam for motion detection and videolog recording.
•Click the ‘Monitor’ tab to open the ‘Monitor’ menu.
>The Monitor menu main screen appears.
>The total amount of videologs is shown above the content panel (top right).
>The ‘Movement’ indicator ( 
) shows the amount of movement that is detected within the Webcam field of view.
•Click ‘Start monitoring’ to start monitoring.
>If movement is detected within the field of view of the WebCam, recording starts automatically.
•Click ‘Start monitoring’ again to stop monitoring.
•Click ‘All logs’ to display all available logs in the content panel.
•Click ‘By date’ to display the content of the various recording dates in the content panel.
•Click on a date to display the log(s) made on that date in the content panel.
•Click ‘
’ to maximize the lower part of the screen and display the camera preview.
•Click ‘
’ to maximize the upper part of the screen and display your videologs.
•Move your cursor onto a button to see a brief explanation of the button function.
•If you need assistance select ‘Application Help’ in the ‘Help’ menu.
22
