Philips SPC1300NC/00 user manual Click ‘ ’ to access the ‘Monitor settings’ menu

Operating the WebCam Chapter

EN

Monitor settings

•Click ‘’ to access the ‘Monitor settings’ menu.

>The following dialogue screen appears.

•Enter the minimum memory capacity you wish to remain on your harddisk during recording.

>Recording stops automatically when harddisk space comes below the set amount of Mbs.

•Check the ‘Notification’ box if you wish a notification to be send to an e-mail address when movement is detected.

•Enter the e-mail address you wish the notification to be sent to.

•Use the ‘Browse’ button to select an audio file if you wish an audio file to start playing as soon as movement is detected.

•Use the sensitivity slider to set the desired sensitivity level for the WebCam detector.The sensitivity level determines the minimum amount of movement that will cause the WebCam to start recording.

The higher the sensitivity level,the sooner recording starts.

•Click the ‘OK’ button to store your settings and close the dialogue box or click ‘’ or the ‘Cancel’ button to close the dialogue box without saving any settings.

Deleting videologs

1Select the logs you wish to delete in the content panel or under ‘By date’.

2Click ‘’.

> The following dialogue screen appears.

3 Click the ‘OK’ button to delete the selected videologs.

23