Installation
EN
> The following screen, including a progress bar, appears.
>The following screen appears when the installation was successful.
5Click on 'Finish'.
6You can now connect your laptop camera.
Note!
The SPC 610NC laptop camera is 'XP Plug & Play'. This means if you are running Windows XP and you have installed Service Pack 2 and the latest Microsoft Windows XP updates you don't need to install the SPC 610NC PC Camera Driver. Simply plug in the camera and you can start using your SPC 610NC laptop camera.
Connecting the camera to your laptop
1Be sure to run the installation CD first, before connecting the camera to the laptop or notebook.
2Be sure your laptop or notebook is activated.
3Connect the USB connector to the USB port of the laptop. > The camera will now derive its power from the laptop.
9
