Code Entry
Code Setup Options: Pressing OK at the CODE SETUP screen presents 3 options for programming a Mode with codes. These are ENTER CODES, (lets you enter a 4 digit code directly from the printed code list) SEARCH CODES, (lets you search through the codes stored in the remote to find the correct one for your device), and BRAND CODES, (lets you search through the codes (just for your brand of device) stored in the remote to find the correct one for your device).
Direct Code Entry
1.Manually turn on the device to be controlled.
2.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.
3.Press and release OK. ENTER CODES is displayed.
4.Press and release OK. MODE KEY? is displayed.
5.Press and release the desired mode button (TV, VCR, etc.). The Mode is displayed along with its currently programmed code.
6.Enter the 4 digit code from the code tables (on separate sheet). After the 4th digit is entered SUCCESS is displayed and the remote returns to normal operation.
If an invalid code is entered, CODE ERROR is shown in the display and the remote returns to normal operation.
7.With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand of device.
Searching for Codes
If your product does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps.
1.Manually turn on the device (TV, VCR, etc.) to be controlled.
2.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.
3.Press and release OK. ENTER CODES is displayed.
4.Press the down navigation button until SEARCH CODES is displayed.
5.Press and release OK. MODE KEY is displayed.
6.Press and release the desired mode button (TV, VCR, etc.). DEVICE? TV is displayed.
7.Using the Up/Down keys, select the Device type to be programmed (TV, VCR, DVD, etc. Note - For TV Mode, only a TV Device can be selected.
10
Code Entry, cont.
8.Press and release OK to confirm selection. SEARCH KEY? is displayed.
9.Press the Channel Up button (or POWER, or PLAY for VCRs/DVDs) repeatedly (up to 300 times) until the Device to be controlled changes channel, turns off or responds accordingly. SEARCHING is displayed (along with the Device selection) during the search process. If the required Code is accidentally passed then press the Channel Down button to backtrack through the Library. Press Channel Up (or Power or Play) to change direction forward again.
10.Press and release OK to install the Code. SUCCESS is displayed and the remote returns to normal operation.
Notes:
1.If the Device does not have a CHANNEL UP button, use PLAY (VCR/DVD) or the POWER button instead.
2.Code Search starts from the currently stored
3.When all codes have been searched SEARCH END is displayed and remote returns to normal operation.
Searching for Codes by Brand
Lets you search for a code for a specific Brand within the Code Library for a particular manufacturer.
1.Turn on the device (TV, VCR, etc.) to be controlled.
2.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.
3.Press and release OK. ENTER CODES is displayed.
4.Press the down navigation button until BRAND CODES is displayed.
5.Press and release OK. MODE KEY? is displayed.
6.Press and release the desired mode button (TV, VCR, etc.). DEVICE? TV is displayed.
7.Using the Up/Down keys, select the Device type to be programmed (TV, VCR, DVD, etc. Note - For TV Mode, only a TV Device can be selected.
8.Press and release OK to confirm selection. BRAND KEY? is displayed.
9.Press and release the numeric key
10.Press the Channel Up button (or POWER, or PLAY for VCRs/DVDs) repeatedly until the Device to be controlled changes channel, turns off or responds accordingly. “Searching” is displayed (along with the Device selection) during the search process.
11
