Learning Commands
1.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.
2.Press the down navigation button until LEARN SETUP is displayed. Press and release OK.
3.MODE LEARN is displayed. Press and release OK.
4.MODE KEY? is displayed. Press and release the desired Mode button (TV, VCR, DVD, etc.).
5.LEARN KEY? is displayed. Press and release the remote key to be taught with original remote code.
6.LEARNING is displayed. Press and hold the original remote key until the SUCCESS or LEARN ERROR is displayed (see Tips on Learning, page 20) followed by the LEARN MORE? (this process can take up to 2 or 3 seconds to complete). Release the original remote button.
7.LEARN MORE? is still displayed. To learn more buttons, press and release OK and repeat from step 5. To exit at this point, press and release the QUIT.
8.PLEASE WAIT is displayed briefly and the remote exits Setup Mode and returns to normal operation.
Line up your remotes (that you’re learning from) in front of the Learning remote, on a hard surface approx. 1 inch apart.
Clearing Commands
To Clear all Learned Commands under a mode
Clearing learned commands is helpful if, for example, you replace your CD player with another brand or model. If you had learned a feature from your old CD player’s original remote on to this remote (such as RANDOM PLAY), that feature would no longer work for your new CD player. Should you wish to remove or clear one or more “learned” commands, follow the steps below:
1.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.
2.Press the down navigation button until LEARN SETUP is displayed. Press and release OK. MODE LEARN is displayed.
3.Press the down navigation button until MODE CLEAR is displayed. Press and release OK.
4.MODE KEY? is displayed. Press and release the desired Mode button (TV, VCR, DVD, etc.).
5.CONFIRM CLEAR is displayed. Press and release OK.
6.PLEASE WAIT is briefly displayed and the remote exits Setup Mode and returns to normal operation.
Master Clear - To Clear all Learned Commands under all modes (recommended on first time Learning)
1.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.
2.Press the down navigation button until LEARN SETUP is displayed. Press and release OK. MODE LEARN is displayed.
3.Press the down navigation button until ALL LEARN CLEAR is displayed. Press and release OK.
4.CONFIRM CLEAR is displayed. Press and release OK.
5.PLEASE WAIT is briefly displayed and the remote exits Setup Mode and returns to normal operation.
22 | 23 |
