The Time Search function allows you to go to a specific point on a tape. You will enter the exact amount of playback time that you wish to skip in order to reach the specified point.
Make sure:
●The VCR is on and is in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.)
●There is a tape in the VCR.
1
Press the TIME SEARCH button.
TIME SEARCH
2
Within 30 seconds, press the PLAY button, the STOP button, or the TIME SEARCH button repeatedly until your desired length of time appears. (Example: 2:50 for 2 hours 50 minutes) You may also press and hold the PLAY button or the STOP button until you reach the desired length of time.
TIME SEARCH
2 : 5 0
3
Within 30 seconds, press the REWIND button or the F.FWD button. The VCR begins rewinding or fast forwarding to the specified point. The time counts down on the screen beneath TIME SEARCH as the searching progresses. When the tape finish- es rewinding or fast forwarding, the VCR will start playback auto- matically.
TIME SEARCH
2 : 5 0
D
Time Search 39
2
1
3
Helpful Hints
•You can set a Time Search for up to 9 hours, 59 minutes (9:59).
•Time Search is not available during recording.
•To exit Time Search mode, press the COUNTER RESET/EXIT button.
•To cancel a Time Search already in progress, press the STOP button.
•If the end of the tape is reached during a Time Search, the VCR will cancel the search and rewind the tape. Details are on page 41.
