Philips SVB106 owner manual Correcting a Timer Recording

30 Timer Recording (cont’d)

Correcting a Timer Recording

If you need to correct a timer recording after you have finished setting the program, follow these steps. Make sure the VCR is on and is in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.)

1

Press the MENU button. The details of your timer recordings appear on the screen. If no timer recordings are set, MENU 1 or the CLOCK SET menu will appear.

	TIMER PROGRAMMING
	DATE	STA/END	CH
B1 05/04		07:30 PM	16
	THU	08:30 PM	SP
3	05/11	10:00 PM	125
	W THU	10:54 PM	SLP
5	05/22	11:00 PM	40
	DAILY	11:30 PM	SLP

2

Press the PLAY button or the STOP button to select the timer recording you want to correct.

NOTE: If some empty program numbers exist, the lower program num- ber appears on the screen when you press the REWIND button. In this case, you can set up a new timer recording.

3

Press the F.FWD button.

ONE TIME PROGRAM

PROGRAM NUMBER		1
DATE	05/04	THU
START TIME 07:30		PM
END TIME 08:30		PM
CHANNEL	16
REC SPEED	SP

4

Select the information you want to change using the F.FWD button. Press the REWIND button to go back one step. (There is an exception. Do not press the REWIND button while the program number is flashing. If you do, you will cancel the timer recording completely.)

5

While the information is flashing, enter the correct infor- mation by pressing the PLAY button or the STOP button.

6

1	6
4		3

2&5

When all the information is correct, press the COUNTER RESET/EXIT button to exit. Turn off the VCR before the timer recording.