Philips SVB106 Playing, VHS Quasi Play Back Sqpb, Read and follow the steps below to play a tape

Read and follow the steps below to play a tape.

1

Turn on the TV and set it to channel 3 or 4, whichever chan- nel to which the CH3/CH4 switch on the back of the VCR is set.

Playing 23

1Turn on the TV.

2Insert a tape.

2

Insert a tape in the VCR. The POWER, VCR/TV, and CST.IN lights will appear. If the tape’s record tab has been removed, play- back will begin automatically.

3

If playback does not start automatically, press the PLAY button.

6

4

Press the STOP button to stop playback.

5

5

3

Press the REWIND button to rewind the tape.

6

Press the EJECT button to remove the tape.

4

S-VHS Quasi Play Back (SQPB)

This VCR has a SQPB function that allows you to view a tape recorded in S-VHS format. A tape recorded in S-VHS format will play the same as a tape recorded in normal format. This VCR detects whether the tape is recorded in S-VHS format or in nor- mal format.

Helpful Hints

•If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position. (Press the VCR/TV button so that the VCR/TV light appears.) Then, press the PLAY but- ton.

•Other playback options and fea- tures are on pages 34-44.

•When you play a tape recorded in S-VHS format on this unit, you can not get the high resolution that would be available on an S-VHS VCR. Noise lines (black and white streaks) may appear on the picture.

•If AUTO REPEAT is set to ON, play- back will begin automatically, even when the record tab is intact.