Before Using Your VCR 5
Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the bottom of the remote control by sliding the lid in the direction of the arrow.
2
Insert two AA batteries inside the battery compartment with their + and – ends aligned as indicated.
3
Replace the battery compartment lid.
Using the Remote Control
●Point the remote control at the VCR’s remote sensor (see page
21)when using the remote control to operate the VCR.
●Do not put objects between the remote control and the VCR.
Recording Prevention
Video cassette tapes have record tabs to ensure that recordings are not erased accidentally.
1
2
3
1
To prevent recording, break off the tab with a screwdriver.
2
To allow recording, cover the hole with cellophane tape.
VCR maintenance
●In this VCR, use only tapes with the
mark.
●Make sure any light adhesive
●Periodic maintenance is required to maintain your VCR’s excel- lent performance. This VCR has an Automatic Head Cleaner. However, the video heads will require replacement eventually. Only an authorized service center should perform this service.
1
2
Helpful Hints
•The remote control and its batteries are supplied.
•Do not mix alkaline and man- ganese batteries.
•Do not mix old and new batteries.
