Open the battery compartment.
2 Install
Install remote control batteries
1
2 Insert two AAA batteries with correct polarity
3 Close the battery compartment.
3 Enjoy
DC 5V
Turn on the power of your
HDTV
1
2
Go to the source menu under the settings menu of your HDTV.
Select the HDMI input to which the receiver is connected.
Note
•You cannot control the receiver with the supplied remote control and the receiver follows the transmitter’s status to enter/exit the standby mode.
•The synchronization of standby between the HDTV and the receiver depends on the capability of the HDTV.
