Power On / Off
Connecting the AC cord plug to the Plasma Display.
Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 8)
Connecting the plug to the Wall Outlet.
Notes:
•Main plug types vary between countries. The power plug shown at right may, therefore, not be the type fitted to your set.
•When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet first.
Press the Power switch on the Plasma Display to turn the set on:
Power Indicator: Green
Power | Remote Control |
Indicator | Sensor |
INPUT MENU
When first switching on the unit |
|
|
| From the second time | ||||||
OSD Language |
| |||||||||
Following screen will be displayed when the unit is |
| English (UK) |
|
| on, the below screen is | |||||
|
|
| displayed for a while (setting | |||||||
| Deutsch |
|
| |||||||
turned on for the first time. |
|
|
| condition is an example). | ||||||
| Français |
|
| |||||||
Select the language with the remote control. |
| Italiano |
|
|
|
|
|
| ||
|
|
|
|
|
| |||||
Unit buttons are invalid. |
|
|
|
|
|
|
|
| ||
| Español |
|
| PC |
|
| ||||
|
|
|
| ENGLISH (US) |
|
|
|
|
|
|
| 1 Select the language. |
|
|
|
|
| 16:9 |
|
| |
|
|
|
|
|
|
|
|
|
| |
| 2 Set. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Notes:
•Once the language is set, the screen won’t be displayed when switching on the unit next time.
•From the second time on, language selection can be done from the Setup menu. (see page 13)
Press the 
button on the remote control to turn the Plasma Display off.
Power Indicator: Red (standby)
Press the 
button on the remote control to turn the Plasma Display on.
Power Indicator: Green
HDMI 
Turn the power to the Plasma Display off by pressing the 
switch on the unit, when the Plasma Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns orange in the power off state.
12