Setup for Input Signals
Sync
Select Signal from the “Setup” menu during RGB input signal.
Signal | [ RGB ] | 2 | change |
Sync | Auto | ||
XGA Mode | 1024 ×768 | 1 | select |
|
|
Auto 
on G 
VBS 
Setting RGB sync signal:
Confirm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto: The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and V sync.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.
SDI Through
Set the active through function of the Dual Link
Note:
Settings can only be performed for this menu when a slot mounted with a Dual Link
Signal | [ Digital ] | 2 change |
SDI Through | Off |
1 select
Off 
On
On: Enables active through.
Off: Disables active through.
Input signal display
Displays the frequency and the type of the current input signal.
This display is valid only for Component / RGB / PC and Digital input signal. Display range:
Horizontal 15 - 110 kHz Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital signal input.
33.7 | kHz | |
60.0 | Hz | |
Signal Format | 1125(1080)/60i | |
|
|
|
|
|
|
33.7 | kHz | |
60.0 | Hz | |
Dot Clock Freq. | 108.0 | MHz |
Signal Format | 1125(1080)/60i | |
|
|
|
40