Philips TH-50VX100E Scrolling bar and Test patterns functions, EXT. SCALER function

Basic Controls

Scrolling bar and Test patterns functions

Pressing activates one of the following two functions. The function button setting can be configured by accessing “Function button assign” in the Options menu. (see page 41)

Scrolling bar Test patterns

	Press
Scrolling bar			Press to
			select
	Scrolling bar		“Yes”.
Yes		No	Press.

Activates the Scrolling bar only screensaver. After 15 minutes, the display enters standby mode.

Scrolling bar only

	Press
Test patterns			Press to
			select
	Test patterns		“Yes”.
Yes		No	Press.

Each time you press a different test pattern is displayed (seven in all).

	Colour Bars		Red		Green
				Frame
Black						Blue
		1% window	(2 lines × 2 dots)

To exit this mode, press any button. To exit this mode, press any button other than .

Note:

Auto power off is deactivated during Scrolling bar or Test patterns operation. (see page 36)

EXT. SCALER function

Each time you press, an external scaler is activated or deactivated.

External scaler mode On

Off: Use the built-in scaler.

On: Use an external scaler.

The setting is valid with the following signals.

1125 (1080) / 24p•25p•30p•50p•60p

With input signals other than these, specifying “On” will display the following message.

Input signal must be 1125p(1080p)

External scaler mode On

Note:

You can also turn the built-in scaler On and Off by accessing “External scaler mode” in the Setup menu. (see page 35)

16