Philips TH-50VX100E Specifying the scaler

Specifying the scaler

This menu can be used to specify whether the built-in scaler or an external scaler is used for scaler functions such as resizing and picture quality adjustment.

The setting is valid with the following input signals.

1125 (1080) / 24p•25p•30p•50p•60p

1

2

3

4

Display the menu screen.
										Signal
Select “Setup”.										Screensaver
										Component/RGB-in select
	Picture					2 OK					RGB
										External scaler mode	Off
	Setup
										Power save	Off
	Pos. /Size
						1 select				Standby save	On
	Sound
										Power management	Off
										Auto power off	Off
Select “External scaler mode” and set.
										OSD design	Type1
										OSD position	Upper left
										OSD Language	English (UK)
	Signal
						2 change
	Screensaver
	Component/RGB-in select					1 select
		RGB
			Off		On
	External scaler mode	Off
	Power save	Off	Off: Use the built-in scaler.
	Standby save	On	On: Use an external scaler.
	Power management	Off	Note:
	Auto power off	Off
	OSD design	Type1	Selecting “On” in this setting deactivates the following settings and
	OSD position	Upper left	disables these operations.
	OSD Language	English (UK)	Pos. /Size menu: H-Size, V-Size, 1:1 Pixel Mode, Display size
							(see page 30, 31)
			Picture menu:					Brightness, Colour, Hue, Sharpness, Memory save,
								Memory load (see page 21, 25, 26)
			Advanced settings: Cinema reality, Noise reduction (see page 23)
			Signal menu:					XGA Mode (see page 39)
			Options menu:					All Aspect (see page 41)
			ASPECT Controls (see page 17)
			“EXT. SCALER” is displayed in the menu screen to indicate that an
			external scaler is in use.
				Normalise					EXT.SCALER
				Picture Mode					Normal
				Contrast				25
				Brightness
				Colour
Exit the menu.				Hue	or

35