Philips TP3284C1 manual Using the AUDIO/VIDEO Input Jacks CONT’D, Connect the S-VIDEO

USING THE AUDIO/VIDEO INPUT JACKS (CONT’D)

S-VIDEO INPUT

The S(uper)-Video connection on the rear of the television can give you better picture detail and clarity for the playback of S-VHS VCR tapes or Digital Video Discs than the normal antenna picture connections.

Note: The VCR (or Digital Video Disc player) must have a S- VIDEO OUT(put) jack in order for you to complete the connec- tions shown on this page.

BEGIN

Connect the S-VIDEO

CABLE to the S-VIDEO input jack on the rear of the television, then connect the AUDIO (red and white) cables to the AUDIO IN (IN 1) jacks on the rear of the TV.

Connect the S-VIDEO

CABLE to the S-VIDEO output jack on the accessory device. Then, connect the red and white AUDIO CABLES to the AUDIO

NOTE: Repeatedly pressing the AV button on the remote will toggle the picture source from the current chan- nel, to the last viewed channel, then to the AV 1 connection, to the AV 2 connection.

This also applies to the Multi Media button on the remote. Repeatedly pressing the Multi Media button will toggle the picture source from the current channel, to the last channel viewed, then to the MM 1 (AV 1) connection, to the MM 2 (AV 2) con- nection.

24

AV 1

AV 2

When using the S-Video input jack remember that it will take prece- dence over any video signal coming from the Video IN-1 jack. The sig- nal from the S-Video jack can only be viewed on the AV 1 channel.

	BACK OF TV
			1
S-VIDEO CABLE	S-VIDEO
(NOT SUPPLIED)	VIDEO
	L
ANT "A"	AUDIO
75	R/MONO
		IN-1	OUT
		AUDIO IN
		(RED/WHITE)
VIDEO IN			2
(YELLOW)
ANT/CABLE	S-VIDEO	R	L
	OUT	AUDIO OUT
OUT
		BACK OF ACCESSORY

(left and right) output jacks on the rear of the accessory device.

43

Turn the VCR (or Digital

SLEEP

POWER

Video Disc Player) ON.

Press the AV button on the remote to tune to the AV 1 chan- nel. You are now ready to view the tape or disc on the TV.

SMART HELP

The S-VIDEO and VIDEO IN-1 inputs are in parallel. The

S-VIDEO input is will take prece- dence when in use. If separate video signals are connected to the S-

TV	AV	ON/OFF	POSITION	FREEZE
VCR	SWAP	SOURCE	PIP CH
			UP	DN

ACC

SMARTSMART

SOUNDPICTURE

MENU SURF

VOL			CH
	MUTE
CC	STATUS	CLOCK	A/CH
	EXIT	TV/VCR
VCR			MULTI

RECORDMEDIA

INCREDIBLE

DBS, DVD, Video Game, etc.

(EQUIPPED WITH S-VIDEO AND

AUDIO OUTPUT JACKS)

IF YOU ARE USING A

NON-STEREO DEVICE,

USE ONLY THE AUDIO

R/MONO JACK. IF A

DUMMY JACK IS

PLUGGED INTO THE

AUDIO L, NO SOUND

WILL BE HEARD.

Video and VIDEO IN-1 inputs, the signal from the VIDEO IN-1 input will not be useable.

If you have added AV 1 to the TV’s channel memory, just press the CHANNEL + or – buttons until the AV 1 (channel) mode is selected.

STEREO

32