Philips TP3284C1 manual Setting the Remote Control to Operate Accessory Devices

SETTING THE REMOTE CONTROL TO OPERATE ACCESSORY DEVICES
our remote control is set to
Ywork your TV and many
infrared (IR) remote control
VCRs, Cable Boxes, Satellite
Systems, DBS, DVD, etc.
However, an easy onetime step
may be necessary before the				SLEEP
remote will work your accessory	1
device.
Try this initial check to see if		TV		AV		ON/OFF	POSITION
going on to the following section
is necessary.
BEGIN		VCR		SWAP		SOURCE
Place the TV/VCR/ACC	VCR						UP
Mode Switch in the proper posi-		ACC
tion.
Point the remote control at
the device and press the POWER
button.
Does the remote turn the							2
device ON?				POWER
	Satellite Receiver	SLEEP			FREEZE
				POSITION
		TV	AV	ON/OFF	PIPCH	DN
If YES, stop and try other func-				SOURCE	UP
				AP
				SW
			VCR
				ACC
tion buttons on the remote. If						T
						SMAR
they also work the device, then					T	PICTURE
					SMAR
						SURF
					SOUND
						MENU
the remote is ready and no fur-							CH
ther steps are needed.
	Cable Converter					VOL	MUTE	A/CH
							ATUS CLOCK
						CC	ST
							TV/VCR
							EXIT	TI
If NO, continue...								MUL
							VCR	MEDIA
							RECORD	INCREDIBLE
								STEREO

First look up a THREE-DIGIT

remote control number for your

brand of Device before going through the simple steps on the following page.

Find your Three-Digit Code on pages 39-40.

SMART HELP

Remember, if more than one number is listed, you may

have to try more than one code in order to locate your Device’s remote code.

36