Philips TP3284C1 manual First connect the original cable, Connect the ANT OUT jack on

MORE PIP (PICTURE-IN-PICTURE) CONNECTIONS
IP hookup is possible with a
PVCR and a Digital Video Disc
Player (or similar device).
BEGIN				REAR OF TV
First connect the original cable
TV signal or Antenna signal to the
ANT IN jack on the back of the		4
VCR.						3
				S-VIDEO
Connect the ANT OUT jack on
				VIDEO
the rear of the VCR to the ANT”A”
	2
75 Ω input on the rear of the TV.		ANT "A"		AUDIO
				L
Connect the yellow Video		75		R/MONO
				IN-1	IN-2	OUT
Cable from the VIDEO OUT jack
on the VCR to the VIDEO IN jack
on the TV (labeled VIDEO IN-2).
Then, connect the red and white
Audio Cables from the AUDIO OUT	75 OHM
jacks on the VCR to the AUDIO IN
	COAXIAL					VIDEO
jacks on the rear of the TV (labeled								AUDIO
	CABLE
		AUDIO				CABLE
AUDIO L & R/MONO IN-2).								CABLES
		CABLES				(YELLOW)
								(RED AND
		(RED AND				VIDEO		WHITE)
Connect a second yellow Video		WHITE)				CABLE
					(YELLOW)
Cable from the VIDEO OUT jack
on the Video Disc Player to the							OUT	OUT
						ANTENNA
VIDEO IN jack on the TV (labeled						OUT
						VIDEO		L AUDIO R
VIDEO IN-1). Then, connect a sec-
						ANTENNA
ond set of red and white Audio						IN
		1					IN	IN
Cables from the AUDIO OUT jacks	AC-3(ANALOG OFF)	AC-3 DIGITAL			VIDEO	S
	PCM(ANALOG ON)
		PCM/
on the Digital Video Disc Player to	AUDIO SELECTION	2			VIDEO OUT
		R	ANALOG	L
the AUDIO IN jacks on the rear of	AUDIO OUT
the TV (labeled AUDIO L &
R/MONO IN -1).
						75 OHM	VCR
						COAXIAL
						CABLE
Note: When selecting the PIP		DVD (OR SIMILAR)				1
SOURCE, the Digital Video Disc
Player will appear on the AV 1
channel, and the VCR will appear
on the AV 2 channel.
						OR
						OUTSIDE UHF/VHF
						ANTENNA OR
						CABLE TV SIGNAL
		47