Samsung VP-MM11S/MEA, VP-MM11S/XEF, VP-MM11S/XET, VP-MM12S/XET Setting the White Balance, Power

ENGLISH Photo Mode :
Setting the Capturing Options
Setting the White Balance
The White Balance allows calibration of the picture for		3		23	IN						.
accurate colour display in different lighting conditions.			2592					.
It is recommended to set the white balance prior to any recording.
1. Turn the Mode Dial to Photo mode.						1.		.
2. Press the [POWER] button to turn on the Miniket Photo.						2.		[POWER]		Miniket	.
3. Press the [MENU] button.						3.		.
◆ Menu screen appears.
						◆		.
4. Move the joystick left / right to select <White Balance>.
						4.	/			<White Balance>.
5. Select an option by moving the joystick up / down, and
						5.	/			(OK)
then press the joystick (OK).		4
◆ To set the Custom WB, frame the white subject on			Photo			◆	Custom WB,
the center. Press the joystick (OK) to set, or press the			ISO				OK		MENU
[MENU] button to cancel and exit to Menu screen. Photos			White Balance					Custom WB
captured after the Custom WB set will be affected by the			Auto	A
setting.			Daylight
Auto	Automatically sets according to the shooting		Cloudy				Auto			.
	environment.		Fluorescent H					/		/
Daylight	Adjusts the colour according to		Move	OK Select	MENU Exit		Daylight
	daylight/indoor, outdoor light
Cloudy	You can select this when you cannot have	5	Photo				Cloudy	.
	daylight as a direct light, such as when it is
	partly-cloudy or cloudy.		ISO				Fluorescent H	Suitable in a halogen or 3-wavelength light
Fluorescent H	Suitable in a halogen or 3-wavelength light
			White Balance					environment.
	environment.						Fluorescent L
Fluorescent L Suitable for a fluorescent light environment.			Auto	A					.
Tungsten	Suitable for an incandescent light		Daylight				Tungsten
	environment.		Cloudy
							Custom WB				.
Custom WB	You can adjust the white balance as you wish		Fluorescent H
	based on the shooting environment.		Move	OK Select	MENU Exit	6.	[MENU]			.
6. Press the [MENU] button to exit the menu.
		6				◆				.
◆ An icon indicating the selected white balance appears				23	IN
						◆		<Auto>		.
on the screen.			2592
◆ If <Auto> is selected, no icon will be displayed.
						[	]
[ Notes ]
						✤ I				<Auto>
✤ In general outdoors picture taking, <Auto> setting will allow
						✤
users to have best results.							.
✤ As the lighting condition changes, set the appropriate white
balance before taking a picture.						✤	T <Custom WB>
✤ The subject used for <Custom WB> should be white. If not,
the colour balance will not be natural.						✤				72
✤ Regarding White Balance setting in Scene modes, refer to page 72.						✤ While the menu screen is displayed, pressing the
✤ While the menu screen is displayed, pressing the [Record / Stop] button will
						[Record / Stop] button will exit the menu.					69
exit the menu.