To cancel the MEALTIMER” control setting:
l Push the Off/Cancel pad to return the display to the time of day.
Method Z-Using Start Time and Stop Time:
1.Position the oven rack(s) properly and put food in the oven.
2.Make sure the clock is set to the correct time of day. (See “Setting the clock? on page 11.)
3.Push the Bake pad to enter the Bake mode. Use the Temp pad(s) to set the desired temperature. Push A to raise the temperature or V to lower the temperature in 5°F incre- ments. Use these pads until the desired temperature shows in the small display.
After you have set the desired temperature, the display will show the set temperature and the time of day. BAKE will light up.
4.Push the Delay Start Time pad. The time of day with the colon flashing will show in the display and START TIME will light up.
5.Use the Hour and Minute pads to set the desired start time. Push the “up” (A) or “down” (V) pad(s) until the correct time shows in the display.
This example shows a desired start time of 2 o’clock.
8.Push the Stop Time pad. The time of day with the colon flashing will show in the display and STOP TIME will light up.
22
