4.Lift out the reflector bowl. For model RF385PXY, Q series, also lift out the trim ring. See “Cleaning other range parts” on page 35 for cleaning instructions.
(Model RF385PXY, Q series, shown)
Replacing
1.Make sure all control knobs are turned off and cool before replacing surface units and reflector bowls.
2.Line up openings in the reflector bowl and (on RF385PXY, Q series) notches in the trim ring with the surface unit receptacle and the element
(Model RF385PXY, 0 series, shown)
3.Hold the surface unit as level as possible with the terminal just started into the receptacle. Push the surface unit terminal into the receptacle.
33