Whirlpool RF385PXY manual

Models: RF385PXY

1 40
Download 40 pages 49.37 Kb
Page 25
Image 25
7.Use the Hour and Minute pads to set the desired stop time. Push the “up”(A) or “down” (V) pad(s) until the correct time shows in the display.

-.

7.Use the Hour and Minute pads to set the desired stop time. Push the “up”(A) or “down” (V) pad(s) until the correct time shows in the display.

This example shows a desired stop time of 2:30. The oven will automatically start cooking at 2:00 (the set stop time minus the set cook time).

8.Push the Start/Enter pad. DELAY and BAKE will light up in the display to indicate that the oven is programmed to start at a later time.

NOTE: The display will show “door” and a tone will sound once a minute for 5 minutes if the door is latched when you try to bake/ roast.

You can change the temperature or time settings any time after pushing the Start/Enter pad by repeating just Steps 3 through 7.

9.When the start time is reached, a one-second tone will sound and DELAY will go off. The display will show the set cook time. Lo”, HEAT, TIMED and BAKE will light up in the display to show that the oven is heating. The display will count down the baking/roasting time in minutes.

10.When the baking/roasting time is completed, the oven will turn off automatically, beep four times and “End”will show in the display. You will also hear four 1-second tones every minute until you push the Off/Cancel pad.

NOTE: To disable reminder tones, push and hold the Cook Time pad for 4 seconds. To reactivate tones, repeat this procedure.

25

Page 25
Image 25
Whirlpool RF385PXY manual