Philips VP115CAT owner manual Hookups Without a Cable Box cont’d

Hookups Without a Cable Box (cont’d) 7

3

Connect the RF coaxial cable (supplied) to the ANT(enna) OUT jack on the

back of the VCP and to the ANTENNA IN Jack on the TV. (You may use either a snap-on type or screw-on type of coaxial cable, whichever you prefer. A snap-on type is supplied.)

		ANT IN
		CH3
	AUDIO	CH4
DC	OUTPUT	ANT OUT
13.2V
	VIDEO

ANT IN

CH3

CH4

ANT OUT

75Ω
ANT	/
CABLE

	ANTENNA IN Jack
RF coaxial cable	(on back of TV)
	example only

4

Plug in the power cords of the TV and the VCP.

5

Set the CH3/CH4 switch on the back of the VCP to CH3 or CH4, whichever channel is not used or least used in your area. To operate your VCP with your TV, set the TV to the same channel. For example, when playing a tape, if the CH3/CH4 switch is set to CH3, the TV should be on channel 3.

CH	4
or	3
CH
	CH3 / CH4
	Switch
TV
	CH3
	CH4

6

		ANT IN
		CH3
	AUDIO	CH4
DC	OUTPUT
13.2V		ANT OUT
	VIDEO

ANT IN

CH3

CH4

ANT OUT

You are ready to turn on the VCP. Go to page 16 to play a tape.