Hookups With a Cable Box (cont’d) 9
This connection differs from the one shown on page eight. You may still view any channel (selecting channels at the Cable Box), but the instructions for playing a tape are different.
1.Connect a Cable signal to the VCP’s ANT(enna)
IN Jack.
|
| ANT IN | |
|
| CH3 | |
| AUDIO | CH4 | |
DC | OUTPUT |
| |
13.2V | ANT OUT | ||
| |||
| VIDEO |
|
2.Use an RF coaxial cable (supplied) to connect the ANT(enna) OUT Jack on the VCP to the IN Jack on the Cable Box.
75Ω |
|
ANT | / |
CABLE | |
IN
OUT
TV ANTENNA
IN Jack
3.Use a second RF coaxial cable to connect the OUT Jack on the Cable Box to the ANTENNA IN Jack on the back of the TV.
Watching TV with the VCP Off
1
Turn off the VCP.
2
Turn on the TV and set it to the Cable Box output channel (channel 3 or 4).
3
Turn on the Cable Box and select the channel you want to watch at the Cable Box.
Playing a Tape
1
Make sure the Cable Box is on the same channel as the
VCP’s CH3/CH4 switch.
2
Set the TV to the Cable Box output channel (channel 3 or 4).
3
Turn on the VCP or insert a tape, if necessary. Press the PLAY button to play the tape. Details are on page 16.
