Special installation functions

Youcan select one of the following installation functions in
orderto adapt the video recorder to your own specific
requirements.

Automatic TV channel allocation (Follow

TV)

Withthis function, the video recorder stores the channels in
thesame order as on the TV set. This only works if the video
recorder(socket EXT.1AV 1 )and the TV set are connected
witha scart cable. You must switch off any equipment
connectedto socket EXT.2AV 2 .
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button on the remote control. The main
menuwill appear.
CLOCK
OSD
CHANNEL ALLOCATION
CHANNEL/FREQUENCY
MANUAL SEARCH
AUTOSEARCH
LANGUAGE
FOLLOW TV
DIRECT RECORD
COUNTER
------------------------
-/+ OK
cSelectthe line ’FOLLOW TV’ with the Pror Pq
button.
dPressthe OK button.’TV01’ will appear on the video
recorderdisplay.
TV01
eSelectprogramme number ’1’ on the TV set.
fConfirmwith the OK buttonon the video
recorder-remotecontrol. The video recorder compares
theTV channels on the TV set and the video recorder.
Ifthe video recorder found the same TV channel as the
TVset, then it stores it at ’P01’.
DWhen’NOTV’ (no signal from TV set) appears in the
display,the TV channels can not be allocated
automatically.In this case, read ’Manual TV channel
allocation’.
gWaituntil, for example, ’TV02’ appears.
hSelectthe next programme number, for example, ’2’ on
theTV set.
iConfirmwith the OK buttonon the video
recorder-remotecontrol.
DIfyou allocated the wrong TV channeL, you can go
backone step with the D/Sr button.
jRepeatsteps gto iuntil all TV channels have been
allocated.
kToend, press the TV/STANDBY mbutton.

Automatic TV channel search

Thevideo recorder will search for all TV channels.
Ifyou want to start the automatic TV channel search again,
thenfollow the instructions below.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button on the remote control. The main
menuwill appear.
cSelectthe line ’AUTOSEARCH’ with the Pror Pq
button.
dPressthe OK button.The ’Automatic TV channel search’
starts.
SEARCH 00
eWhenthe TV channel search is complete, ’READY’ will
appearon the screen.
Howto search for a TV channel manually, you can read in the
section’Manual TV channel search’.
8